Quest

Travel Rod Dimensions: Length (Total): Approx. 52" Length (Each Part): Approx. 26" Diameter (internal): Approx. 1 1/4" Material: Aluminum Thickness: Approx. 1 mm Includes separate rubber piece to attach to rod to prevent scoop from sliding *To be used with Quest SCOOPAL sandscope ONLY!

Scoopal Scoop Features: 2Lb 4oz light weight 1.4 mm 304 stainless steel 0.3" diamond pattern holes Easy to step on angle 2x U bolts to install the Travel Rod. Scoopal Scoop Dimensions: Bucket height: Approx. 5" Bucket width: Approx. 6" Bottom Bucket length: Approx....

Quest Water-Resistant Pinpointer Metal Detector Xpointer Carry your Quest X Pointer everywhere! This small, rugged device trace the target after you first dig. It features audible and vibrating alarms, so you can use the X-Pointer without removing headphones. Microprocessor circuitry ensures maximum sensitivity and requires...

The Drop Leg Bag and Holster is the solution for keeping your Pinpointer within reach at all times! Made of Heavy Duty Durable Cordura and Heavy Duty Stitching. Drainage grommets in the bottom of the pouch. Durable design that keeps the probe within reach. Compatible...

Features Li-Poly battery built inside shell For 60M/200f under salt water operation Ribbed and ergonomic body Easy to use two buttons control Lost alarm Lanyard attachment loop cap Target locking function LED flash light Specifications Protection: 200FT / 60M under fresh or saltwater Dimensions:...

Quest XPointer Pro Underwater PI Li-Poly Pinpointer Metal Detector with belt clip. The Quest XPointer Pro is fully submersible up to 60 meters (200 ft) in fresh or salt water. The new addition to our pinpointer family, the Xpointer Pro, features advanced detecting technology,...

Quest Micro USB Cable to 1/8" 3.55mm Male Audio Plug, to be used with the WTX 2.4G audio transmitter (1703.1000). Comes with a 1/8" to 1/4" Audio Plug adaptor. Connect the Sound Output of any 1/8" Sound socket to your Quest Wireless Transmitter Unit....

WRX 2.4G audio receiver Technology: 2.4G low latency Audio output: 1/4″/6.35mm audio output jack Attachment: Clipper on the back for attaching Water protection level: IP65 weather-proof Control: Power on/off, volume up, volume down, pairing Recharge: Micro USB recharge port Indication: Status, battery condition, charging Battery: Fully charge for 33 hours running WTX 2.4G...

This scoop is ideal for treasure hunting on the beach for shallow water hunting. This high quality, durable sand scoop allows you to recover targets faster- a must have for metal detecting! Features: 2Lb 4oz light weight 1.4 mm 304 stainless steel 0.3" diamond pattern...

Quest Q40 Metal Detector with 11 x 9" Wide Scan TurboD Waterproof Search Coil. No matter where you hunt, the Q40 comes with all that you need to start your metal detecting projects. The lightweight Q40 allows easier swings and efficient area covering. We...

Quest Diamond Digger Tool Left Side Serrated Edge with Sheath  Quest Stainless Steel Diamond Digging Tool with Left Side Serrated edge when holding it. This double-edged digger has a saw tooth edge on one side of the edge to cut through roots and a sharpened edge on the other to...

Quest Stainless Steel Diamond Digging Tool with Right Side Serrated blade when holding it. This double-edged digger has a saw tooth edge on one side of the blade to cut through roots and a blade on the other to cut through tough grass and...

Quest Q30+ Metal Detector New from Quest! Includes: Quest Q30 Metal Detector RaptorX TurboD 9x11" Coil Wirefree Lite Headphones Specifications: Water Resistance up to 5m Frequency: 14KHz VLF Increased search efficiency in salt water Vibration mode to search underwater 15 volume levels Modes: Park,...

Quest Blade 9.5 x 5.5″ Turbo D Search Coil Cover Specifications 9.5" x 5.5" / 24cm x 14cm Compatible with Quest Blade | BladeS | BladeX search coils Black

High Quality Brown Leather Sheath Left Sided & Quest Diamond Left Digger Keep your metal detecting tools handy with this leather sheath for your digging tool and pin pointer. Specifications Belt Loop width: approximately 3" Digging Tool sheath width: approximately 3" Pinpointer loop width: approximately 2"...

Quest Metal Detectors Spade Foldable: Fold and pack into your daily backpack for the next adventure. Lightweight: Lightweight and tough as a monster. No compromise. Multi-function: It's a spade, a hoe, a cutter, and even... a beer opener.   Features Full Length: 110cm (43.30")...

Quest 13'9" Coil Cover fits on Beast / BeastX Coil This accessory will protect your coil against debris, water, dust, and wear. Recommended to prolong your coil's durability and life. Easy to install and remove. Specifications: Coil Cover Shape: Elliptical Fit Quest's 13x9 Beast/Beast...

The transmitter provides three ways to attach it to your detector: You can clip it on the rod or magnet stick on your control box, or even hang it on a piece of metal detector cloth, so you can take it off easily to...

Quest PRO Series Metal Detector Control Box Protective Rain Cover. This control box rain cover provides protection from the elements. Velcro is used to ensure a snug fit to protect your detector's control box from light rain, dust and minor bumps and scratches. Made...

Quest XPointer PinPointer Detector with Woven Holster for the pinpointer, Diamond Digger Tool Right, and Belt Clip Lanyard. The water resistant Xpointer is an extremely useful pinpointing tool for any serious detectorist. Carry your Quest Xpointer everywhere! This small, rugged device traces the target after you...